Hydraulic Cylinders CCA Series casting hydraulic cylinder for LIH CHERNG HYDRUALIC CO., LTD

Hydraulic Cylinders CCA Series casting hydraulic cylinder

Home > Hydraulic cylinder
Inquiry
symbol

Model  CCA Series

Feature:
  • Hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder.
  • non-standard lift cylinder, is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. It has many applications, notably in construction equipment like engineering vehicles, manufacturing machinery, and civil engineering.
  • The piston of non-standard rod cylinder has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end / head end).
  • Flanges, trunnions, clevises, Lugs are common cylinder mounting options. The piston rod also has mounting attachments to connect the cylinder to the object or machine component that it is pushing / pulling.
  • A hydraulic cylinder is the actuator or "motor" side of this system. The "generator" side of the hydraulic system is the hydraulic pump which brings in a fixed or regulated flow of oil to the hydraulic cylinder, to move the piston.
 
How to order:

Description of each model code:

Model Number: H1-SD-040-B-1000-1-1-N-10

 

Model code

Descriptions

1-

H1

Series Number

L1type pressure: 70kg/cm2

M1type pressure:140kg/cm2

H1type pressure:210kg/cm2

2-

SD

Bore type(see specification)

SD type

FA type

FB type

LA type

TC type

CA type

3-

040

cylinder bore (Ø/ mm)
Ø40, Ø 50, Ø 63, Ø 80, Ø 100, Ø 125,

Ø 140, Ø 150, Ø 160, Ø 180, Ø 200,

Ø 224, Ø 250/(mm)

4-

B

Rode size types:

B:bigger type

C:standard type

5-

X

Stroke length(mm)

Customized requirements (mm)

6-

1

Port position(front)

(see specification)

1, 2, 3, 4,

7-

1

Port position(back)

(see specification)

1, 2, 3, 4,

8-

N

cushion

N: none

H: cover side

B: both sides

R: bore sides

9-

10

Stop cushion for cylinder bore

1-10m/m

99-990m/m

 

Specification Table

Related Products

Model  CSD Series
Model  CFA Seires
Model  CFB Series
Model  CLA Series
LIH CHERNG HYDRUALIC CO., LTD © 2019 Rights Reserved.